
JEDEC previews DDR6 with 12.8 GT/s starting rates and shorter modules
JEDEC has published an early preview of DDR6, outlining a next-generation memory standard that remains under development. Its proposed initial RDIMM data rate is 12.
via Guru3DReported by 4 outlets
The story so far
AI summary of the reporting below · Updated · How we work
Standards body JEDEC has released an early preview of the next-generation DDR6 memory specification. The standard will debut at a baseline transfer rate of 12.8 GT/s, or 12,800 MT/s, delivering 153.6 GB/s of bandwidth per module, which quadruples the 38.4 GB/s baseline bandwidth offered by DDR5. At the same time, physical DDR6 memory modules will measure 74mm in length, making them 44% shorter than the 133mm format used by DDR5. [3][4]
To achieve these speeds, JEDEC is expanding the overall data bus width by 50% to 96 bits, split into four 24-bit sub-channels instead of DDR5's dual 32-bit channels. The specification also doubles the bank count to 64 and introduces die stacking through Through-Silicon Vias. DDR6 will support 128Gb dies, potentially boosting server RDIMM capacity to 1TB or more per slot and consumer modules to 128GB or 256GB. JEDEC has not yet disclosed the official pin count or nominal operating voltage. [3]
The memory standard remains under active development and lacks an official launch date, though Tom's Hardware notes that 2029 is viewed as a realistic commercialization target. Potential form factors under consideration include RDIMM, UDIMM, and CAMM formats. While server RDIMMs are expected to launch at DDR6-12800 and reach DDR6-14400 or beyond, initial launch speeds for consumer hardware have not yet been determined. [3][4]

JEDEC has published an early preview of DDR6, outlining a next-generation memory standard that remains under development. Its proposed initial RDIMM data rate is 12.
via Guru3D
DDR6 is shaping up to deliver over 50 % more bandwidth than DDR5, thanks to a 50 % wider data bus and higher transfer rates. The upcoming standard will also introduce more compact memory modules, higher DRAM die densities and improved power efficiency, targeting everything from conventional PCs to AI servers.
via Notebookcheck
As VideoCardz notes, a full-size DDR5 stick measures just over 133 mm from end to end. The design JEDEC has in mind for DDR6 measures 74 mm, putting it within a few millimeters of those little SO-DIMMs found in laptops. Unfortunately, you can probably guess who stands to benefit most...
via TechSpot
Upcoming DDR6 memory cuts module length from 133mm to 74mm while kicking off at 12.8 GT/s, more than doubling DDR5’s baseline transfer rate.
via Tom’s Hardware